This frock has got two parts .One is the round yoke with facing and the other is skirt portion. Top edge of skirt portion is sandwiched between the layers of yoke and yoke facing and stitched. Circular edge of the yoke and neck if finished with piping.
Prepare the draft as explained here
Using the draft prepared cut yoke, yoke facing and front and back skirt pieces Mark the points X, X',H,H',Y,Y' , G and ,G' on the skirt pieces as-well as on the yoke pieces.
 |
| pattern pieces of the dress |
Make a slash of 2” In the middle of the curved edge of the skirt back for opening.
Stay stitch around yokes and armsyes.
Join yoke front to yoke back at shoulders. Open the seams and press. Repeat it for yoke facing.
 |
| shoulder lines are joined |
 |
| seems opened and pressed |
 |
| Yoke facing |
Fold the bias binding or piping in to half, width wise and press.
Place folded bias binding on the right side of the yoke along the curved edge,keeping raw edges together and stitch having a seem of 1/2" all around.
Place folded bias binding on the right side of the yoke along the curved edge,keeping raw edges together and stitch having a seem of 1/2" all around.
Fold the raw edges of the yoke inside and press
Place the yoke facing on the yoke,keeping right sides together and matching shoulder lines and curves. Secure them with pins. Stitch them together along the back opening and neck line, 1/2' away from the raw edges as shown in the figure below. Clip the curves.
 |
| Piping folded back |
Place the yoke facing on the yoke,keeping right sides together and matching shoulder lines and curves. Secure them with pins. Stitch them together along the back opening and neck line, 1/2' away from the raw edges as shown in the figure below. Clip the curves.
 |
| Facing placed on the yoke |
Turn inside out and press. Now yoke is ready.
 |
| Finished yoke |
 |
| Yoke with facing |
part of the armscyes are in the skirt portion. Finish them with piping Finish slash made in the skirt back with continuous bound placket.
Stitch front skirt to front yoke facing keeping right side of the facing to wrong side skirt together, matching points.X andX' on the yoke to X and X’ on the skirt.with a seam of 1/2''.
In the same way stitch skirt back to left and right yoke of the back.
 |
| Skirt front |
 |
| skirt back |
Smooth the yoke on the facing, position piping of the yoke such that it covers the row of stitches on the skirt.
Tack in place. Stitch in ditch. (Machine stitch should fall where piping meets the yoke.)
Finish the hem by folding ½” inside.Attach press snaps or hook and eye to the plackets.
 |
| Finished frock front view |
 |
| Finished frock back view |
